Suffering from damp on your facade? Here's what you need to know about the right approach | Aquavent

HomeDiscover our tips and adviceMoisture problemSuffering from damp on your facade? Here’s what you need to know about the right approach

Suffering from damp on your facade? Here’s what you need to know about the right approach

Damp problems in your facade are more common than you think – especially if you have an older home or if there is no adequate protection against precipitation or ground water. Where rising damp mainly affects the underside of walls, damp in the facade often occurs as a result of penetrating damp: rainwater that penetrates the wall from the outside. In both cases, this requires a completely different approach. An incorrect diagnosis not only leads to useless costs, but also to permanent damage to your home. Some people also confuse facade problems with condensation problems, which means that moisture problems persist even after facade treatment.

Tackling damp exterior walls: how do you do it?

The question of what the right approach is to treat a damp exterior wall depends on the cause and therefore the expertise on site. When it comes to penetrating damp, the cause is usually a porous facade, damaged joints or a problem with elements on the facade itself. In that case, it is important to make the facade water-repellent again. This is usually done via facade impregnation, where the exterior wall is treated with a transparent water-repellent product. This makes the wall water-repellent, but the facade continues to breathe thanks to the air-permeable structure.

In more serious cases – for example, in the event of severe cracking, heavily weathered bricks or leaks – additional measures may be necessary, such as re-pointing the facade or installing new facade cladding.

Is the moisture problem noticeable on the underside of the facade? Then there is a good chance that there is rising damp. In that case, a wall injection is recommended, in which a moisture-resistant agent is injected into the wall.

What does it cost to have damp in your exterior wall treated?

The price for damp control on exterior walls depends strongly on the chosen technique, the surface area of the facade and the condition of the brickwork. A facade treatment costs on average between €2000 and €4000 for the west facades, depending on the size of your building and preparatory work. Of course, these prices are therefore very dependent on the size of the total facade project and any preparations (scaffolding, aerial platform, etc.) and therefore a correct quotation can only be drawn up after all factors have been fully mapped.

Good to know: in certain cases you may be eligible for damp control premiums.

Choose a specialized damp control company – and avoid expensive mistakes

Tackling damp in exterior walls is a job for specialists. A reliable company therefore first carries out a thorough inspection, looks at the nature of the problem, and then advises a suitable solution. At Aquavent you are assured of professional advice and years of expertise in treating all types of moisture problems.

From wall injection to facade impregnation: we ensure a healthy and dry home. We help you with an overview of all possible moisture problems to help you on your way. Usually the message is: the sooner you tackle the problem, the smaller the chance of damage. That is why we advise you to request your free diagnosis immediately – so you can be sure of the right approach.

Onze specialist Simon is een ervaren expert op het gebied van opstijgend vocht. Dankzij zijn diepgaande kennis en jarenlange praktijkervaring kan hij problemen snel herkennen, de juiste diagnose stellen en effectieve oplossingen adviseren. Simon begeleidt klanten van de eerste inspectie tot en met de uiteindelijke behandeling.